• Completely assemble the bicycle checking the alignment of the frame & fork
• Add additional lubrication
• Pre-stretch the cables
• Align and adjust the derailleurs
• Grease the pedal threads
• Align & tighten the crank sprockets and arms 
• Position the saddle level and center it on the seatpost
• Attach the brakes and adjust them correctly
• Assemble the handlebars
• True the wheels
• Our Master Mechanic then Test Rides each bicycle on a controlled loop (to make sure that the gears and brakes are correctly adjusted). This assures us that your bicycle is in mint condition.
• We will then disassemble the bicycle just enough to fit it back into the shipping box, add more packing protection, and secure all movable parts to prevent any damage that might occur during transit.Oversized bicycles will arrive in 2 boxes. Both Wheels need to be attached.

Reassembly typically takes our customers only 10 to 15 minutes.

Sincerely,

If you do not choose the pro build service, bikes will be sent to you Dealer Ready. Dealer ready bicycles are delivered to you 90% assembled and packed for shipping in the original manufacturer’s box in factory direct mint condition. The brakes, gears, and cables are not adjusted. Although the rear wheel is attached, the front wheel, handlebar, and seat are not attached.

Please note, Dealer Ready Bicycles must be assembled by a certified bicycle mechanic at a professional bike shop in order to validate warranty.

If you purchase your bike in "Dealer Ready" condition, professional assembly by a qualified bike professional is required including the following:

1. Install saddle to seat post and seat post to frame.
2. Install Handlebar on stem and stem on fork.
3. Adjust headset.
4. Install front wheel in fork.
5. Install pedals to crank arms.
6. Inspect cranks and bottom bracket.
7. Connect and adjust front brakes.
8. Adjust rear brake, front and rear derailleurs and shifters.
9. Inspect wheels for true and round condition and adjust if necessary.
10. Install reflectors and inflate tires